Leica asp6025 User Manual

91
ASP6025 Tissue Processor
This function is used to transfer instrument data from a USB stick
into an ASP6025. The following data is saved:
• allprograms,
• thereagentlist,
• theinstrumentstatus,
• theinstrumentconguration,
• alllogles,
• theinstrumentinstallation.
Saving or loading data (continued)


• Theinstrumentsoftwarewillcheckthattheinstrument
data on the stick is actually complete. If it is not, the loading
operation will be terminated.
Fig. 119

Loading data from a USB stick
To write the instrument data from USB stick back to the instru-
ment, proceed as follows:
• InsertaUSBstickinoneoftheUSBportsontheinstrument
and press the LOAD button.
• PresstheENTRIES and LOAD FROM USB buttons to open
the window of the same name.
• Oncealldatahasbeenloadedsuccessfully,amessage
conrming this appears on the screen and prompts the
user to check that the reagents have been assigned correctly
(Fig. 120).
• Finally,successfulcompletionoftheentireoperationisalso
indicated in a message.
Fig. 120
5. Operation
Since there is already instrument data on the
ASP6025, this will be overwritten and thus
deleted. This will be indicated in a warning
message (Fig. 119) and must be conrmed
with YES. Pressing the NO button terminates
the process.

Leica asp6025 Specifications

General

Brand	Leica
Model	asp6025
Category	Computer Hardware
Language	English