To Next Page

To Previous Page

Instructions for Use V 2.4 RevL - 12/2015

5.1.9 Saving or loading data

Saving data to a USB stick



With this function, all data relating to the instrument can be

transferred to a USB stick.

The following data is saved:

• allprograms,

• thereagentlist,

• theinstrumentstatus,

• theinstrumentconguration,

• alllogles,

• theinstrumentinstallation.

To save the instrument data to a USB stick, proceed as follows:

• PresstheENTRIES and SAVE TO USB buttons to open the

window of the same name.

• InsertaUSBstickinoneoftheUSBportsontheinstrument

and press the COPY FILES button.

Fig. 116

• Adisplayonthescreenshowswhichdataiscurrentlybeing

copied while the les are being transferred (Fig. 118).

• Whenalldatahasbeensuccessfullytransferred,acompletion

message appears.

Fig. 117

Fig. 118



5. Operation

If instrument data has already been stored on

the USB stick, it will be overwritten and thus

deleted. This will be indicated in a warning

message (Fig. 117) and must be conrmed

TWICE with YES. Pressing the NO button

terminates the process.

Leica asp6025 User Manual

Questions and Answers: