To Next Page

To Previous Page

Instructions for Use V 2.4 RevL - 12/2015

5. Operation

5.2 Reagents

5.2.1 Editing the reagent list

Entering reagent names

This is done via the REAGENTS menu option in the SETTINGS menu. You must be logged on at

supervisor access level to proceed.

• Fromthestartscreen,pressSETTINGS to go to the window of the same name and press the

REAGENTS button there.

• TheSET UP REAGENTS AND WARNING THRESHOLDS window opens (Fig. 136).

• Toaddareagent,proceedasfollows:

 • PressINSERT to display the keyboard.

 • Enterthenewreagentname.

 • PressOK to conrm.

 • You will automatically be promptedto select the reagentgroup for the new reagent

(Fig. 137).

 • AllocatethenewreagenttotheappropriategroupandpressOK to conrm.



Fig. 136

Select the reagent group

Fig. 137

The ASP6025 is shipped together with a standard reagent list and predened inltration programs.

The reagent list is adapted to these programs. If the operator writes his own programs, new reagents may have

to be entered.

Leica asp6025 User Manual

Questions and Answers: