Leica DMLS - Page 12

12
Photoeyepieces*
The HC PLAN observation eyepieces (fitting
diameter 30 mm) are designed for direct visual
observation only. Special eyepieces with fitting
diameter of 27 mm and the engraving
Fig. 9 Fitting the UCL condenser disc
1 Condenser disc, 2 Light ring for darkfield or phase contrast
(or λ or λ/4 compensator), 3 Centering screws, 4 Axis,
5 Centering keys, 6 λ or λ/4 compensator, 7 2.5x...20x
auxiliary lens
Fig. 10 Assembly of the condenser (does not apply for
versions with fixed condenser). The stage was disassembled
to give a clearer picture
1 Condenser height adjustment, 2 Orientation groove and pin
(→ 8.3), 3 Clamp screw, 4 Condenser centration
Fig. 7 Condensers UCL 0.90/1.25 OIL (1) and CL/PH 0.90/1.25 OIL (4)
The CLP/PH 0.85 and UCLP 0.85 condensers required for
polarisation look very similar to the CL/UCL, but are not
intended for oil imersion (Engraving P 0.85)
1 UCL 0.90/1.25 OIL, 2 Fixing screw (disc axis), 3 Condenser
disc, 4 CL/PH 0.90/1.25 OIL, 5 Centering keys, 6 Auxiliary lens
for DM LS/LSP, 7 Slide with light ring DF or PH or diffusion
screen for using the 2.5x objective or λ compensator
Fig. 8 Underneath of condenser, with (1) and without (2)
auxiliary lens LS (2), 3 Orientation pin
HC...PHOTO are used for the adaption of
photomicrographic equipment with a fixed
magnification factor, e.g. MPS systems and for
special TV adaption systems (Adapter 36.4).
5
7
4
1
7
7
6
2 3
3
3
1
2
8
9
45
6
7
1
22
3
1
4
3
2
10