Leica EM TXP User Manual

6. Settings
6.1 Rotation speed setting
Press RPM button the LED goes on and the appropriate
speed value can be set by using the - or + button. The
speed is displayed on the LCD display above the rpm
inscription.
Recommended values:
When switching on the mains-switch on the
rear side of the instrument, the motor spindle
mechanism initialises and moves to the home
position. The instrument is now ready for use.
12000 ~ 20 000 rpm
diamond disc cutter ~ 15 000 rpm
core drill ~ 8 000 rpm
diamond lapping foil ~ 2 200 rpm
aluminium oxide foil ~ 1 000 rpm
neoprene cloth ~ 300 rpm
Above values can be adjusted according to the sample; they are guide values only.
Miller
Page 18 Operating Manual Leica EM TXP 10/10

Leica EM TXP Specifications

General

Category	Laboratory Equipment
Brand	Leica
Model	EM TXP
Power Supply	100-240 V AC, 50/60 Hz
Applications	Sample preparation for electron microscopy
Functions	Sawing, milling, grinding, polishing
Knife Type	Diamond
Processing Capacity	Single specimen
Temperature Range	Ambient
Number of Reagent Stations	Not applicable