Leica ICC50 E - Page 13

Leica ICC50 E or Leica ICC50 W User Manual Service 13
Care, Maintenance, Contact Persons (Continued)
Protection from dirt
Dust and dirt will affect the quality of your
results.
Put the available dust cover over the micro-
scope camera when it will not be used for a
long time.
Protect your microscope camera from moisture,
fumes and acids and from alkaline, caustic and
corrosive materials and keep chemicals away
from the instruments.
Protect your microscope camera from oil and
grease.
Do not grease guide surfaces or mechanical
parts.
Repair, service work
See "Safety concept" booklet
Repairs may only be carried out by Leica Micro-
systems-trained service technicians.
Only original Leica Microsystems spare parts
may be used.
Before opening the instruments, switch off the
power and unplug the power cable.
Touching the live circuit can cause injury.
Plugs, optical systems and mechanical parts
must not be disassembled or replaced, unless
doing so is specifically permitted and described
in this manual.
Electrical considerations

Risk of electric shock. Removing the
covers of the Leica ICC50 E or Leica
ICC50 W camera exposes hazardous volt-
ages, which if contacted, could cause injury
or death. Please contact an authorized Leica
Microsystems dealer for technical service.
Contact address
If your instrument no longer works
perfectly, contact your Leica representa-
tive. You can find information on worldwide
Leica representatives on the Leica website:
www.leica-microsystems.com.
Leica Microsystems (Switzerland) Ltd.
Max Schmidheiny Strasse 201
CH-9435 Heerbrugg (Switzerland)