Leica ICC50 E - Safety Instructions

Leica ICC50 E or Leica ICC50 W User Manual General Notes 6
Safety Instructions
Safety concept
Before using your Leica ICC50 E or Leica ICC50 W
camera for the first time, please read the "Safety
concept" brochure included with your instru-
ment. It contains additional information about
handling and care.
Description
The Leica ICC50 E or Leica ICC50 W fulfills the
highest requirements for observation and
documentation.
Designated use
See "Safety concept" booklet
Non-intended use
See "Safety concept" booklet

The devices and accessories described
in this operating manual have been
tested for safety and potential hazards. The
responsible Leica affiliate must be consulted
whenever the device is altered, modified or
used in conjunction with non-Leica compo-
nents that are outside of the scope of this
manual.
Unauthorized alterations to the instrument or
noncompliant use shall void all rights to any
warranty claims!
Location of use
See "Safety concept" booklet

Set up the electrical components at
least 10 cm from walls and combustible
objects.
Avoid large temperature fluctuations, direct
sunlight and vibrations. These conditions
can distort measurements and micrographic
images.
Requirements for the owner/operator
See "Safety concept" booklet
Ensure that:
The Leica ICC50 E or Leica ICC50 W camera is
operated, maintained and repaired by autho-
rized and trained personnel only.
All operators have read, understood and
observe this user manual, and particularly the
safety instructions.