Leica ICC50 E or Leica ICC50 W User Manual Get Set! 30
WiFi Mode – Capturing and Adjusting Images Using a Wireless Device
(Only for Leica ICC50 W)
1. Be sure the camera is connected to a power
source – see power source section on
page 24.
2. Press the red power button.
3. The status light will blink red. Wait until
the status light is green and one of the
mode button's is also green. This may take
approximately 30 seconds.
4. If a mode button other than WiFi mode is
lit green, then press the WiFi button and
wait until both the status LED and the WiFi
mode button is green.
5. Follow the directions of your WiFi view-
ing device to connect to the inter-
nal WiFi network of the camera.
WiFi Password: leicamicro
6. Open the appropriate app on your mobile
device or appropriate software on your
wireless enabled PC for viewing, capturing,
and adjusting the camera image.
To Next Page
Loading...
