Leica ICC50 E or Leica ICC50 W User Manual General Notes 8
Safety Instructions (Continued)
Instrument safety and EMC
Our device has been designed, produced and
tested in compliance with
O IEC EN 61010-1: Electrical equipment for
measurement, control and laboratory use
– Safety – Part one: general requirements
O EN 60950-1: Information technology equip-
ment – Safety – Part one: general require-
ments
O EN 300328: Electromagnetic compatibility
and Radio spectrum Matters (ERM); Wide-
band transmission systems; Data transmis-
sion equipment operating in the 2,4 GHz
ISM band and using wide band modulation
techniques; Harmonized EN covering essen-
tial requirements under article 3.2 of the
R&TTE directive.
O Radio interference suppression in compli-
ance with EN 55011 class B
O Noise immunity in compliance with
DIN EN 61326-1.
The device meets the requirements of EU
directives
O 2014/35/EU Low voltage directive
O 2014/30/EU EMC directive
O 2011/65/EU RoHS directive
and carries the CE mark.
The device must be disposed of in
accordance with 2012/19/EU WEEE
directive.
Intended for indoor use only in all EU member
states, EFTA states and Switzerland.
To Next Page
Loading...
