68
Version 2.0, Revision I
Troubleshooting
7
2. A Reset restores the printer to the same state as directly after switching on. All print jobs in the
print queue are deleted.
3. If the same error continues to be displayed even after a reset, switch the printer off via the
power switch (back panel) and, after a short waiting period of approx. 30 sec., switch it back
on. If this does not eliminate the problem either, call Leica Technical Service.
7.2 Status messages
(for additional information, refer also to (→ p. 49 – 5.2 Display indications))
Display
code
LED Meaning
MAG. EMPTY flashing The printer is waiting for an individual slide to be placed in
the feeding chute for printing.
MAG. EMPTY flashing Magazine no. 1 empty
MAG. EMPTY flashing Magazine no. 2 empty
MAG. EMPTY flashing Magazine no. 3 empty
– Ink print head cleaning is in progress.
– Temperature in the flash power supply is too high.
– Flash bulb has reached its maximum life.
– Prompt requesting maintenance.
– Prompt to clean the print head.
INK EMTPY flashing Ink cartridge has been changed; instrument waiting for
confirmation via ERROR, CLEAN, or LOADED button.
To Next Page
Loading...
