34
MOTORHOME OPERATION UNITY MOTORHOME
3� Pull the swivel lock lever
3
(located behind the
seat) to the left, and swivel the seat slowly toward
the center line of the motorhome to prevent
damage to the seat, door panel and post.
3
Swivel must be locked in the forward facing
position when vehicle is in motion. Always
open door slightly, and swivel driver’s
seat clockwise, or swivel passenger’s seat
counterclockwise.
CAUTION
LUMBAR SUPPORT
Turn the lumbar support knob
4
clockwise or
counterclockwise to suit your comfort needs.
4
DRIVER/PASSENGER SEAT
CONTROLS
SWIVEL FUNCTION
1� To activate the swivel function of a seat, lift the
slide release bar
1
and slide the seat forward�
It is essential that the seat is moved forward
to prevent damage to the door panel and post
when swiveling the seat.
1
2� Move armrest
2
into upright position�
2
All seatbelts retractors are equipped with locks
that engage when the belt extends too quickly.
Move the spade end of the seatbelt slowly and
steadily across your body when fastening
to prevent the lock from engaging. If the belt
locks while extending, release the tension and
allow it to retract fully. Then pull out to fasten.
WARNING
To Next Page
Loading...