5.4101.8538.0 B
2-2 Safety
2.2 Safety Instructions
YOU are responsible for the SAFE operation and maintenance of your machine. YOU must make sure that
you and anyone else who is going to operate, maintain or work in the vicinity of the machine knows all the
related SAFETY information in this manual.
YOU are the key to safety. Good safety practices protect you and the people around you. Make these
practices a working part of your safety program. Make sure that EVERYONE who operates, maintains or
works near the machine obeys the safety precautions. Do not risk injury or death by ignoring good safety
practices.
• Owners must train operators before they operate the machine. This training must be repeated at least
annually.
• The operator must read, understand and obey all safety and operating instructions in the manual.
• A person who has not read and understood all safety and operating instructions is not permitted to
operate the machine.
• Do not modify the equipment in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the equipment and persons.
• Only use approved spare parts and make sure that they are only installed by authorized technicians.
2.2.1 General Safety
• Read and understand this manual and all safety signs before you connect power supplies to operate,
maintain or adjust the machine.
• Only trained persons are permitted to operate, maintain or adjust the machine.
• A first-aid kit must be available in or near the barn where the machine operates. Store in a highly visible
place.
• Know the emergency medical center number for your area.
• When a part on the machine is broken or missing, take the machine out of operation. Make sure the
part is repaired before you put the machine into operation again.
• Wear protective clothing (safety shoes).
• Review safety related requirements with all machine operators frequently (annually).
• Contact your nearest Lely service provider if you have any questions.
2.2.2 Electrical Safety
• Only an authorized electrician must install the electrical power supply for the machine.
• Replace damaged electrical lines, conduits, switches and components immediately.
• Make sure the electrical grounding of the electrical system and all parts of the machine meets the local
rules and regulations.
• The machine must be connected to a socket with earth connection.
• The machine must be connected to the power net according to the local rules and regulations.
in n o vato rs in ag ric u lt u re
To Next Page
Loading...
