LELY Luna - Installation of the Frame

5.4101.8538.0 B
Installation 5-3
Figure 4. Frame installation height
KEY:
A: Installation height
5.3 Installation of the Frame
5.3.1 Installation Conditions
Do not install the machine on a wall or pillar not suitable to carry the load
exerted by the weight of the machine and the cow. Lely does not
recommend to install the machine on a hardboard or plasterboard.
• A wall.
• A round pillar must have a diameter of 5 cm (2 in), 6.4 cm (2.5 in), 7.6 cm (3 in) or 10 cm (4 in).
• A square pillar must have a square profile of 15.2 cm (6 in) or 20.3 cm (8 in).
in n o vato rs in ag ric u lt u re