LELY Luna - Explanation of Safety Decals; Installation of Safety Decals

5.4101.8538.0 B
Safety 2-5
2.3.2 Explanation of Safety Decals
No.
Decal Explanation
1
Warning
Read and understand the manual before
installing or using this machine (see Position
of the Safety Decals on page 2-4).
Failure to follow instructions could result in
serious injury (see Position of the Safety
Decals on page 2-4).
Warning
Rotating parts.
Risk of personal injury.
Keep hands, loose clothing and long hair away
from moving parts during operation of the
machine (see Position of the Safety Decals on
page 2-4).
2
Danger
Risk of electric shock (see Position of the
Safety Decals on page 2-4).
Risk of severe injury or death (see Position of
the Safety Decals on page 2-4).
Do not use a high pressure cleaner to clean
the machine (see Position of the Safety
Decals on page 2-4).
2.3.3 Installation of Safety Decals
1. Make sure that the installation surface is clean and dry.
2. Make sure that the temperature of the mounting surface is not less than 5 °C (41 °F).
3. Find the correct position for the decal before you remove the backing paper.
4. Remove a small part of the cover paper.
5. Put the decal in the correct position on the installation surface and carefully push the small part of
exposed adhesive surface of the decal onto the installation surface.
6. Slowly remove the cover paper and attach the rest of the decal to the installation surface.
7. Puncture small air pockets in the decal with a pin and use the cover paper to smoothen the decal.
in n o vato rs in ag ric u lt u re