5.4101.8538.0 B
5-2 Installation
3. Installation of the motor housing (see Install the Motor Housing on page 5-14).
4. Installation of the box (see Install the Box on page 5-17).
5. Installation of the brush (see Install the Brush on page 5-25).
6. Connect the machine to the main electrical supply with the power cable (see Switch the Luna On or
OFF on page 6-1).
Examine the tightening of all bolts, nuts and Allen keys, one week after
the installation.
5.2 Determination of Installation Height
The installation height of the frame depends on the height of the cows that are using the machine.
• Use the shoulder height of the smallest cow to calculate the installation height (A) (see figure 4 on
page 5-3).
• The installation height is shoulder height from smallest cow +40 cm (15.75 in):
in n o vato rs in ag ric u lt u re
To Next Page
Loading...
