5.4101.8538.0 B
5-4 Installation
5.3.2 Install the Frame on the Wall
Preparation
Unexpected cow movement.
Risk of being crushed or trampled.
Block the cow traffic.
1. Determine the correct installation height (see Determination of Installation Height on page 5-2).
Installation
1. Install the plates (4, 1) on the frame (6) with the bolts (5), washers (2) and nuts (3) (see figure 5 on
page 5-5).
2. Mark the positions of the holes on the wall (see figure 6 on page 5-6).
3. Drill the holes in the wall.
Potential falling object.
Risk of personal injury.
Always ware safety shoes and stand clear from the machine part during
installation.
4. Install the frame on the wall.
in n o vato rs in ag ric u lt u re
To Next Page
Loading...
