5.4101.8538.0 B
Installation 5-11
5.3.4 Install the Frame on a Square Pillar
Preparation
Unexpected cow movement.
Risk of being crushed or trampled.
Block the cow traffic.
1. Determine the correct installation height (see Determination of Installation Height on page 5-2).
Installation
1. Use a pen to mark the installation height on the pillar (see figure 4 on page 5-3).
2. Install the bracket (1) to the frame (5) with the bolts (2), washers (3) and nuts (4) (see figure 10 on page
5-12).
Potential falling object.
Risk of personal injury.
Always ware safety shoes and stand clear from the machine part during
installation.
3. Adjust the top of the frame (5) to the mark on the pillar (see figure 11 on page 5-13).
4. Install the frame (5) with the bolts (3), washers (2) brackets (1) and nuts (4).
in n o vato rs in ag ric u lt u re
To Next Page
Loading...
