5.4101.8538.0 B
Installation 5-1
5 Installation
5.1 Installation Possibilities
Electrical hazard.
For indoor use only. Do not install the machine exposed to weather
elements.
Electrical hazard.
The wall socket must be installed according to the local rules and
regulations.
Electrical hazard.
Install the wall socket on a minimum height of 2.3 m (90.6 in).
Install the machine on a wall or pillar suitable to carry the load exerted by
the weight of the machine and the cow. Lely does not recommend to
install the machine on a hardboard or plasterboard.
Install the machine on a location where it does not disturb the cow traffic.
The installation process of the machine has the following sequence:
1. Determination of the installation height (see Determination of Installation Height on page 5-2).
2. Installation of the frame. The machine can be installed in three different positions:
• On a wall (see Install the Frame on the Wall on page 5-4).
• On a round pillar (see Install the Frame on a Round Pillar on page 5-6).
• On a square pillar (see Install the Frame on a Square Pillar on page 5-11).
in n o vato rs in ag ric u lt u re
To Next Page
Loading...
