EasyManua.ls Logo

LELY Luna - Operation Safety; Installation Safety; Maintenance Safety

LELY Luna
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.4101.8538.0 B
Safety 2-3
2.2.3 Operation Safety
Read and understand this manual and all safety signs before you connect power supplies to operate,
maintain or adjust the machine.
Keep unauthorized persons, especially small children away from the machine at all times. Always
accompany unauthorized persons when they enter the barn.
Keep hands, feet, hair and clothing away from all moving parts.
Always be alert of unexpected movement of the cow.
Keep the machine and its immediate vicinity as clean and as dry as possible.
Contact your nearest Lely service provider if you have any questions.
2.2.4 Installation Safety
Read and understand this manual and all safety signs before you connect power supplies to operate,
maintain or adjust the machine.
The machine has electric parts. Therefor it must be installed indoors. Installing it outdoors can lead to
serious damage to the electrical components of the machine.
Make sure the machine is installed correctly in the barn.
Make sure the electrical power supply is correct before you connect the machine to it.
Only a authorized electrician must install the electrical power supply for the machine.
Make sure the electrical grounding of the electrical system and all parts of the machine meets the local
rules and regulations.
Always block the cow traffic when you work in the manure alley.
2.2.5 Maintenance Safety
Read and understand this manual and all safety signs before you connect power supplies to operate,
maintain or adjust the machine.
Only trained technicians are permitted to do corrective maintenance on the machine.
Always block the cow traffic when you work in the manure alley.
Disconnect the electrical power supply before you clean or do maintenance on the machine.
Install all covers after you finished maintenance.
Do not clean the machine with a high pressure cleaner.
Only clean the brush with water when it is removed from the machine.
in n o vato rs in ag ric u lt u re

Related product manuals