5.4101.8538.0 B
8-4 M12 Connectors
8.3 Bending Risk M12 Cables
Ensure a sufficient bending radius. This is important because a greater
bending radius will better absorb energy that results from cable
movement.
In fixed installations (see figure 27 on page 8-4), the minimum bending radius is 5 times the diameter. For
flexible/moveable installations (see figure 28 on page 8-5) a minimum of 10 times the diameter is
recommended.
Figure 27. Fixed installations
KEY:
A: R = Minimum radius
in n o vato rs in ag ric u lt u re
To Next Page
Loading...
