LELY Splendimo 320 M - 5.2 Preventive Maintenance

5.2 Preventive Maintenance
5.2.1 Clean the Splendimo
1. Make sure the Splendimo is in the parking position.
2.
Lift the safety guard and lock it with the hook.
3. Use a water jet to thoroughly clean the Splendimo.
4. Carefully engage the PTO at the lowest possible engine speed for a
short time to remove any water from the cutter bar.
5.2.2 Grease the Pivot Points
• Requirements:
•
Grease pump
• Biodegradable grease (Total Biomultis SEP2 or equivalent)
1. Use the grease pump to grease the pivot points.
Figure 16. Pivot Points
Maintenance 5-3
M-H026.1004EN