5.1.7 Maintenance Before Prolonged Storage..................................................................................5-1
5.1.8
Maintenance After Prolonged Storage.....................................................................................5-2
5.2 Preventive Maintenance...........................................................................................................5-3
5.2.1 Clean the Splendimo................................................................................................................5-3
5.2.2 Grease the Pivot Points...........................................................................................................5-3
5.2.3 Grease the PTO shaft..............................................................................................................5-4
5.2.4 Replace the Gearbox Oil..........................................................................................................5-5
5.2.5 Replace the Drive Element Oil.................................................................................................5-6
5.2.6 Grease a Mower Element........................................................................................................5-7
5.3 Corrective Maintenance...........................................................................................................5-9
5.3.1 Remove and Install a Mower Knive.........................................................................................5-9
5.3.2 Remove and Install a Mower Disc.........................................................................................5-12
5.3.3 Remove and Install a Mower Disc on a Drive Element..........................................................5-13
5.3.4 Disassemble the Cutter Bar...................................................................................................5-14
5.3.5 Assemble the Cutter Bar........................................................................................................5-16
6. Diagrams and Tables.........................................................................................................................6-1
6.1 Bolt and Nut Torque Table.......................................................................................................6-1
7. Troubleshooting.................................................................................................................................7-1
8. Specifications.....................................................................................................................................8-1
8.1 Splendimo 320 M Specifications..............................................................................................8-1
vi Table of Contents
M-H026.1004EN