Uncoupling the implement
43
Release the pressure from the hydraulic
hoses. See the tractor manufacturer's
operating instructions.
Remove the top link from the plough
headstock (1).
Disconnect the hydraulic hoses and
electrical cables.
Fit the protecting caps.
Disconnect the hydraulic hoses with
couplings between the headstock (1)
and adjusting nut (2).
Release the safety catch on the stand
(3).
Pivot the stand (3) downwards.
Disconnect the lower links from the
cross shaft.
CAUTION
Risk of injury if the stand drops.
Unlock the lower link locking device.
Lower the plough completely.
Check that the lower links are fully dis-
connected from the cross shaft.
1
2
3
To Next Page
Loading...
