To Next Page
E
Edward SandovalAug 11, 2025
What to do if LEMKEN Farm Equipment plough does not penetrate the soil?
- JjenniferparkerAug 12, 2025
If your LEMKEN Farm Equipment plough isn't penetrating the soil effectively, there are a couple of things to check: * First, the pitch angle of the shares might be too small. Try extending the body to increase the distance between the point and the frame, but do not extend it more than 2 cm. * Second, the top link might be attached too high on the plough headstock. Try moving it to a lower position.
General
