52
13.1.6 Protective equipment
Risk of accident due to working without protective equipment
There is always an increased risk of accidents when carrying out
maintenance work and repairs.
Always wear appropriate protective equipment.
13.1.7 Utilised tool
Risk of accident due to use of unsuitable tool
If working with an unsuitable or defective tool, there is a risk of ac-
cidents and injuries.
Perform all work on the device with a suitable and functional
tool only. This applies in particular to the use of lifting gear.
Risk of back injuries
If your posture is not correct when installing or fixing heavy or
cumbersome components, you may suffer back injuries which re-
quire long convalescence.
Installation and maintenance work may be carried out by trained
and instructed personnel only.
Perform all work on the device with a suitable and functional
tool only. This applies in particular to the use of lifting gear.
Risk of accident due to tool slipping off
If applying a large force, e.g. when loosening bolts, the tool may
slip off. This may result in hand injuries on sharp-edged parts.
Avoid applying a large force by using suitable auxiliary equip-
ment (e.g. extensions).
Check nuts and bolt heads, etc. for wear and, if required, consult
an expert.
To Next Page
Loading...
