LEMKEN Opal 080 E - Environmental Protection; Maintenance Intervals; After Initial Commissioning (after no more than 2 Hours); Daily Checks

Maintenance and repairs
53
13.2 Environmental protection
 Ensure that all materials and operating supplies used to
maintain and care for the device are disposed of in line with
environmental regulations.
 All recyclable components should be recycled.
 Observe the national regulations applicable in your country.
13.3 Maintenance intervals
13.3.1 After initial commissioning (after no more than 2 hours)
Check
What needs to be done?
Bolted connections
 Tighten all the bolts and nuts on the implement to the
appropriate tightening torque, see «Tightening tor-
ques, page 54».
13.3.2 Daily checks
Check
What needs to be done?
Hydraulic hoses
 Check the hydraulic hoses for damage and
leaks.
 Replace damaged or faulty hydraulic hoses im-
mediately.
Hydraulic hoses must be replaced within six years
from the date of manufacture.
Always use LEMKEN-approved hydraulic hoses.
Safety equipment
Check that the safety equipment is working pro-
perly. See «Safety features of the device, page
11».
Soil working implements
 Check all the soil working implements for dama-
ge and wear.
 Replace damaged or worn components.