Safety measures and precautions
24
Keep all safety instructions and danger warnings on the device in a completely
legible state. The affixed safety and warning signs provide important information
on safe operation. Comply with them to ensure your safety!
Do not alter, retrofit or modify the device, potentially impairing safety, without
the approval of the manufacturer. The manufacturer is not liable for any damage
resulting from arbitrary modifications to the device!
Operate the device only in compliance with all connection and default values
provided by the manufacturer!
Use original spare parts only!
3.10 Safe use of the implement
3.10.1 General
Before starting work, familiarise yourself with all the equipment and controls and
how they work.
Do not operate the implement unless all the safety guards are in place and cor-
rectly positioned. For field work: remove safety guards that are designed for
transport only.
Always attach the implement correctly and only attach it to the equipment provi-
ded for that purpose.
Always take great care when attaching the implement to and detaching it from
the tractor.
There is a risk of injury due to crush and shear points in the area around the
three-point linkage.
Before attaching or detaching the implement to/from the three-point linkage,
move the control device to the position where the implement cannot be raised
or lowered accidentally.
Do not stand between the tractor and implement when operating the external
controls for the three-point linkage.
Do not stand in the danger area around the implement or climb onto the imple-
ment during operation.
To Next Page
Loading...
