EasyManua.ls Logo

LEMKEN Opal 080 E - Attaching the Implement; Specific Safety Information; General

LEMKEN Opal 080 E
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Attaching the implement
35
8 ATTACHING THE IMPLEMENT
8.1 Specific safety information
Risk of injury from the parked implement
Never enter the danger zone between the tractor and imple-
ment.
Read and observe the "Safety measures and precautions" sec-
tion and the special safety instructions "Risk of injury from the
parked implement".
The implement is not a play area.
Climbing on the parked implement may cause serious injuries,
e.g. as a result of slipping or tripping.
Do not climb on the parked implement.
8.2 General
Attach the plough parked in working positi-
on to the tractor as follows:
Switch the tractor's hydraulic system to
position control.
Connect the lower link to the cross shaft
(1).
Secure the lower link.
Use the tractor's hydraulic system to lift
the implement until the stand is suffi-
ciently raised from the ground.
Remove the connector pin (2).
Remove the stand (3).
1
3
2

Table of Contents

Related product manuals