LEMKEN Opal 080 E - Weekly Checks; Tightening Torques; General

Maintenance and repairs
54
13.3.3 Weekly checks
Check
What needs to be done?
Bolted connections
 Tighten all the bolts and nuts on the implement
to the appropriate tightening torque. See
«Tightening torques, page 54».
 If necessary, secure the bolted connections
with locking compound.
13.4 Tightening torques
13.4.1 General
 Secure self-locking nuts that have been loosened against working themselves
loose again by:
 Replacing them against new self-locking nuts
 Using lock washers
 Using locking compounds such as Loctite
The tightening torques set out below refer to screw connections
that are not specifically mentioned in these operating instructions.
Specific tightening torques to be applied are mentioned in the text.
 Identify the relevant screw connection by means of the spare-
parts list or the markings on the screw head.