Lennox Core Unit Controller

19
9.2.3. Factory
This section will display the software version, RTU description, catalog number, model number, serial number and
congurationIDs1&2.
FACTORY
RTU DESCRIPTION
SOFTWARE VERSION
CATALOG NUMBER
MODEL NUMBER
SERIAL NUMBER
CONFIGURATION ID 1
CONFIGURATION ID 2
Figure 21. Factory Menu Structure
9.2.4. Runtimes
The mobile application allows the user to view the runtimes of the different system components.
• Component Runtime - The mobile application shall display hours of runtime for each component. The precision of the
measurement shall be hours:minutes.
• Runtime Cycles - The mobile application shall display cycles of runtime by component.
• Clearing of Runtime - The mobile application shall support clearing of runtime on a component basis.
The available component runtimes are:
• Blower
• Compressor
• Condensing Fan
• Filter
• Heat State
• Power On
• Pre-Install
• Free Cooling Operation
• Power Exhaust Operation
• DehumidicationOperations