21
9.2.5. System Data / Sensor Data / Output
The follow inputs and outputs are as follows:
• Local Inputs. Examples are local thermostat inputs, sensors, digital inputs, setpoints and advanced.
• Network Inputs. Examples are BACnet MS/TP, BACnet IP, Lontalk and S-Bus
• Outputs. Examples are compressor, reheat coil, outdoor fans, heat status, damper, blower, power exhaust and other
service relay output and Crankcase Heater 1 through 4.
SYSEM DATA /
SENSORS / OUTPUTS
INPUTS AND
OUTPUTS
LOCAL THERMOSTAT INPUTS
SENSORS
DIGITAL INPUTS
SETPOINTS
ADVANCED
BACNET MS/TP
BACNET IP
S-BUS
INPUTS
WIRELESS SENSORS
LOCAL
INPUTS
NETWORK
INPUTS
OUTPUTS
COMPRESSOR
REHEAT COIL
OUTDOOR FANS
HEAT STATUS
DAMPER
BLOWER
POWER EXHAUST
OTHER
CIRCUIT 1
CIRCUIT 2
CIRCUIT 3
CIRCUIT4
LOCAL INPUT SETPOINTS
Figure 23. System Data / Sensors / Outputs Menu Structure
To Next Page
Loading...
