eNeRGy-IOM-2020.11-EN
• 23 •
Adjustable / Non-adjustable roofcurb
Example of non-adjustable roofcurb without condensing unit
Example of adjustable roofcurb without condensing
unit
Example of non-adjustable roofcurb with condensing unit
Example of adjustable roofcurb with condensing unit
WARNING : all the roofcurb must be strongly secured to the ground
The contact to the ground must be realized with the entire contact area of the roofcurb (no discontinuous
contact).
CAUTION
• Installation of the unit and accessibility must be compliant with the local regulations. Ensure that all access equipment allow
maintenance operation in safety (electrical cabinet, main switch, panels, filter, refrigerant circuit…)
This recommendation is valid for installations in general and in particular for return and curbs.
• It’s advised to fix curbs and roofcurbs to the unit.
INSTALLATION ON A ROOFCURB
To Next Page
Loading...
