eNeRGy-IOM-2020.11-EN
• 41 •
Filters replacement – Air treatment box
After opening the filter access panel, remove the filter stop.
Use this stop to slide the dirty filters out one by one into the rail.
Replace the dirty filters by clean ones (respect the airflow direction).
Warning: it’s mandatory to use only filters supplied by Lennox. Only these filters are adapted to the unit, and are designed to
ensure the requested filtration quality and the correct air pressure drop. Otherwise you may affect the filtration quality and/or the
pressure drop, with a risk of clogging the unit and/or risk on performance of the unit.
This operation must be repeated for each filter level. There is one stop for each filter level.
To Next Page
Loading...
