Lennox eNeRGy Series User Manual

eNeRGy-IOM-2020.11-EN
• 9 •
Labels
The rooftop may be marked with the following warning labels to alert to potential hazards (on or near the potentially hazardous part).
The rooftop may include the following labels
High temperatures
Electrical Voltage
Rotating parts
Sharp parts
A2L: slightly flammable
Wear of PPE (Personal
protective equipment)
Warning
Inflammable dusty filters
Don’t walk
Don’t strap
Warning main switch
supplied from bottom
EUROVENT certification
Gravity center
Protection by water filter
mandatory
Protection by strainer filter
mandatory
Transport of non-flammable
liquefied gas
Transport of flammable
liquefied gas
OK to send document
Information to read
Electrical connections can loosen during transport.
Please check them before start-up.
CMIM marking (Morocco)
CE marking
CA marking (UK)
EAC Marking (Russia)
Regularly check that the warning labels are still in the correct positions on the machine and replace them if necessary.
INTRODUCTION

Lennox eNeRGy Series Specifications

General

Brand	Lennox
Model	eNeRGy Series
Category	Air Handlers
Language	English