18
» Selecting any item on this screen will display the detail screen for that
device.
» A yellow or red dot with an explanation point indicates there is an alert
condition for that specic device.
Thermostats and Zones
Selecting the icon will bring up either the thermostat Home screen or the
home screen for a specic zone selected, if a zoning system is installed.
For further details concerning zoning control, see “Smart Zoning System” on
page 35.
Lennox
®
Smart Room Sensor
IMPORTANT
The Lennox
®
Smart Room Sensor is currently not compatible with systems
using the Lennox Smart Zoning System (iHarmony) installed.
NOTE: The Lennox Smart Room Sensor is an optional accessory sold
separately.
Selecting this option displays the details of the sensor selected, including the
current room temperature in which the sensor is installed.
Additional details include:
» whether the sensor is participating in temperature averaging
» humidity level in the room
» whether the room is occupied or unoccupied
» battery percentage
» Wi-Fi connection strength
See “Lennox Smart Devices” on page 38 for further details.
Lennox Smart Air Quality Monitor
NOTE: The Lennox Smart Air Quality Monitor is an optional product sold
separately.
Selecting this option will display the Current Air Quality. Color indicators are
Green indicates good, Yellow indicates fair and Red indicates poor.
In addition a Bluetooth signal strength indicator is provided to show the signal
status.
There are also three options that can be selected. Those options are Monitor
Settings, Air Pollutants and More Information.
When selecting Monitor Settings the following options are available:
• Air Quality Monitor Name allows the user to rename the sensor using the
virtual key board.
• Device Type will always show Monitor.
• About Air Quality Monitor will list model and serial numbers along with
rmware version.
• Level of Indoor Air Cleanliness. Options are High, Medium and Basic
(Most Economical)
Information concerning Air Pollutants and More Information can be found
further in this guide (see “Lennox Smart Air Quality Monitor” on page 40).
Lennox Wireless Extender (BLE)
NOTE: The Lennox Wireless Extender BLE (Bluetooth Low Energy) is an
optional product sold separately.
Select this icon to prompt the wireless strength indicator. There is an
additional selection called Extender Settings.
The Extender Setting screen includes:
• Extender Name: Shows the current name of the extender; can also be
renamed from this screen.
• Device Type: Extender
• About Extender: Lists the model, serial number and rmware version.
See “Lennox Wireless Extender” on page 39 for further details.
PureAir S
NOTE: The Lennox PureAir S is an optional product sold separately.
Select this option to display the PureAir S lter life. Red indicates 1-10% lter
life left, yellow indicates 11-30% lter life left and green indicates 31-100 lter
life left.
Also available are:
• More Info: Information is listed here on the PureAir S product.
• Reminders: You can set service reminders here for 1 day, 1 week, 1
month, 3 months or custom.
• Service Contracts: This will list the service contact if it has been entered
into the thermostat.
To Next Page
Loading...
Need help?
General
