28
Settings
The system setting screen allows the homeowner to connect to their home
Wi-Fi router and give their system a name.
Devices
Settings Equipment
Advanced Settings
Wi-Fi
Away
Current Temperature
Fan
Heat/Cool
Humidity
Smart Zoning System
Notifications
Peak Monitoring
Thermostat
Smart Room Sensor
Smart Air Quality Monitor
Wireless Extender
Add Device
Ventilation
Advanced Settings
Unregister System
System Info System
PureAir S
Figure 13. User Setting Menu
System Info
Selecting this menu item allows the homeowner to rename their system.
Settings
Wi-Fi
See “Figure 3. Thermostat Connectivity Status” on page 15 for information
on how to connect to the home Wi-Fi network.
Away
NOTE: Most of the procedures listed in this section can be accomplished
at the thermostat or using the Lennox
®
S40 Thermostat App. See
“Download Lennox Smart Applications” on page 5.
Manual Away
The homeowner can manually put the system into away mode by pressing
the Away icon. When the system is in Away mode, the horseshoe is
grayed-out and shows the Away status text. In order to exit away mode, the
homeowner can press the Cancel icon. In away mode, the Away set points
are used to control the system. The homeowner can modify the Away set
points from the default values in Menu > Settings > Away.
Away
Smart Away
Use the Lennox Smart Thermostat app to control the temperatures in your home while you are away
Reset Smart Away
Please make sure to install the S40 Thermostat App to participate in Smart Away. You can also configure
the Away fence in the Thermostat App.
On
Min
Use the Lennox Smart Thermostat App to control the temperatures in yourhome while you are away.
There are currently 2 mobile devices participating.
55°
85°
55°
Max
√
Smart Away is turned on for your system to run smart schedule.
Reset Smart Away
Away Set-points
Figure 14. Away Settings
To Next Page
Loading...
Need help?
General
