30
2. (Android version 11) To ensure location services for the Smart Away
feature are not auto-disabled by Android operating system, go to:
• Settings > Apps and Notications > Select All Apps >
Thermostat > Permissions and locate Remove permission if app
isn’t used and ensure this setting is disabled.
• Settings > Locations > Apps access to location > Thermostat
and select Allow all the time.
3. (Android version 12)
When running the
setup for the Lennox
®
S40 Smart Thermostat
App, the user is asked
to enable permissions
for precise location.
Select the two options
illustrated here.
Select Precise
Select this option
Current Temperature
Feels Like™
This feature is not a temperature setting, it is the temperature that the space
feels like based on current outdoor, indoor temperature, and indoor humidity.
When Feels Like™ is set to On, the words Feels Like™ will appear above
the indoor temperature display on the Home screen.
Current Temperature
Feels Like
indoor
humidity
indoor
temperature
outdoor
temperature
feels like
++
Feels like temperatures factor in the outdoor temperature and the
indoor humidity for more accurate control of the Temperatures in
your home.
= 75°
On
√
Figure 15. Feels Like™ Screen
Using Smart Room Sensors
When Lennox Smart Room Sensors are installed in the home the
homeowner has the option to include individual Smart Room Sensors for
determining a better Feels Like™ control of the entire home. Using the
temperature detected at each sensor will be factored into the Feels Like™
result when enabled.
Current Temperature
Feels Like
indoor
humidity
indoor
temperature
outdoor
temperature
feels like
++
Feels Like termperatures factor in the outdoor temperature and indoor humidity for more accurate control
of the temperatures in your home
= 75°
On
√
Feels Like
On
√
Kitchen
Master Bedroom
Off
Participating Smart Room Sensors in Temperature Averaging Based on Occupancy
Figure 16. Feels Like™ Screen with Smart Room Sensors Selected
Sleep Mode
Sleep Mode allows one or more Smart Room Sensors to be the primary
source for temperature in a room. Sleep Mode can also turn off the
temperature sensor in the main S40 Smart Thermostat.
For example, if the Sleep Mode is ON in the primary bedroom between the
hours of 9 pm and 6 am, the Smart Room Sensor increases comfort while
the primary room occupants are sleeping. The Sleep Mode setting overrides
the main thermostat and any other sensor(s) not required during those hours.
At least one Smart Room Sensor must be active during Sleep Mode, but
multiple sensors can be set to Sleep Mode.
To Next Page
Loading...
Need help?
General
