42
Poor Air Quality
Poor Network Signal
When the system is cleaning the air an icon displays on the Home screen.
A message displays under the Status screen.
Indoor Level of Air Cleanliness Setting
On the Smart Air Quality Monitor detail screen, select Monitor Settings >
Level of Indoor Air Cleanliness. Options are High, Medium and Basic (most
economical).
These options allows the installing technician to ne-tune the thresholds and
determine Good air quality from Fair air quality. If the technician selects the
High option, this results in the system cleaning pollutants and contaminants
at lower levels.
NOTE: Only Volatile Organic Compounds (VOC) thresholds will be affected
by these settings.
Likewise, Basic mode will trigger air cleaning at higher levels of VOC
compared to Medium.
View Details and Postpone Cleaning Air
When the Lennox Smart Air Quality Monitor has determined that there is
poor air quality in the home it will run the indoor unit fan or any other indoor
air quality devices installed to clean the air. Selecting this notication on the
thermostat Home screen allows the homeowner to view details concerning
the air quality or postpone the air cleaning for a specied time period.
From the thermostat Home screen select Cleaning Air. There are two
options: View Details and Postpone. Select Postpone to postpone by 1, 2, 4,
8, or 24 hours.
Third-Party Integration
The most current information provided by Lennox is available using the QR
codes listed on the QuickStart Guides or product packaging.
Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc.
registered in the US and other countries.
Android is a trademark of Google Inc. Use of this trademark is subject to
Google permission.
Amazon, Amazon Echo, Amazon Alexa and all related logos are trademarks
of Amazon.com, Inc. or its afliates.
IMPORTANT
For third-party applications to work with the thermostat, the thermostat MUST
be connected to the Internet and the user MUST be logged into their Lennox
®
S40 Lennox Thermostat account.
Amazon Alexa
Download the Amazon Alexa app from Google Play or the App Store™ on a
compatible phone or tablet. Then follow the on-screen stops to nish setup.
Once the thermostat has been integrated with the Amazon Alexa app, users
can then use Amazon Alexa to voice control.
Changing to Celsius
Using the Amazon Alexa mobile app, select the three bar icon in the upper
left-hand of the screen.
1. Select Settings.
2. Choose your Amazon device.
3. Select Measurement Units from the menu.
4. Toggle ON Temperature Units - Use metric measurements for
temperature units.
To Next Page
Loading...
Need help?
General
