26
two times and temperature settings that can be adjusted using the edit
schedules option.
Figure 8. Schedule IQ Setup Screen
» At home day wake-up default time is 7:00am and low temperature
setting of 67°F and high temperature setting of 80°F. Start time can be
adjusted by pressing the current time setting and can be adjusted as
exampled in Figure 9.
» At home night sleep default time is 11:00PM and low temperature
setting of 66°F and high temperature setting of 84°F.
» Away - When away from home, Smart Away when enabled (see
“Away” on page 28) is used to set the temperature while the home
is unoccupied. The default low temperature setting of 62°F and high
temperature setting of 85°F. Temperatures for any of the options above
can be adjusted by sliding the low and high temperature circle left or
right on the sliding scale.
Figure 9. Schedule IQ Setup Screen
• Summer – Provides the average Summer indoor cooling set points for
home temperatures. Temperatures and time periods can be adjusted to
desired set points.
• Spring/Fall - Provides the average Spring/Fall indoor cooling set points
for home temperatures. Temperatures and time periods can be adjusted to
desired set points.
• Winter – Provides the average Winter indoor heating set points for home
temperatures. Temperatures and time periods can be adjusted to desired
set points.
• Save Energy – Provides the recommended Energy Star set points
recommended by the Environmental Protection Agency energy savings.
NOTE: All of the above schedule proles can be customized to meet your
particular needs.
Schedule Options
On each schedule screen except for Schedule IQ, there is an option located
in the top right-hand corner of the screen that will allow homeowners to
customize their experience even further.
Figure 10. Schedule Screen Options
To Next Page
Loading...
Need help?
General
