Figure 75. Installing a Drive Carrier Module (1)
2. Put the drive carrier module into the enclosure (see Figure 76 “Installing a Drive Carrier Module (2)” on
page 80). Make sure that the drive carrier is in a position so that the drive points up and the handle
opens from the left.
Figure 76. Installing a Drive Carrier Module (2)
3. Slide the drive carrier fully into the enclosure.
4. Cam the drive carrier home. The camming foot on the carrier engages into a bay in the enclosure.
Continue to push firmly until the handle fully engages. A click should be heard as the latch engages and
holds the handle closed.
80
Lenovo Storage D1212/D1224/D3284Hardware Installation and Maintenance Guide
To Next Page
Loading...
