Lenovo Storage D1212 - Page 120

ddumpo
This command is similar to the ddump command except that the ddumpo command captures more useful
information first with less useful information at the end. ddump invokes the commands in alphabetical order
whereas ddumpo lists by category.
Syntax:
ddumpo
Example:
5+03:25:41.123 M1 GEM> ddumpo
----------------------------------- Version command group -----------------------------------
-----------------------------------------------------------------------------------------------------------------------------
Dumps the i2c Bus Manager device state and device access statistics
Multibus manager device information:
device:0 bus:32 deviceIndex:00:
type: 8
address:0x4c devType:end device
parent:N/A
busMask:0x00000006 selection:0x00000000 selectionDone:0x00000000
Device stats:
read write
success
0 0
slave
0 0
arb loss
0 0
busy
0 0
NAK 0 0
error
0 0
timeout
0 0
slavedrop
0 0
no resp
0 0
total
0 0
----------------Retry Stats------------------------
Success after
NoRetry 0 0
OneRetry 0 0
MultiRetry
0 0
Failure after
MultiRetry
0 0
...
Customer VPD Region
10
Total Writes
0
Success 0
100 Lenovo Storage D1212/D1224/D3284Hardware Installation and Maintenance Guide