Lenovo Storage D1212 - Removing a 3.5-inch Drive Carrier Module

1. Press the latch in the handle towards the handle hinge as shown in Figure 73 “Removing a Drive Carrier
Module (1)” on page 78) to release the carrier handle.
Figure 73. Removing a Drive Carrier Module (1)
2. Gently remove the drive carrier module approximately 1 inch (25mm), then wait 30 seconds (see Figure
74 “Removing a Drive Carrier Module (2)” on page 79).
78
Lenovo Storage D1212/D1224/D3284Hardware Installation and Maintenance Guide