13
Lenovo Converged HX Series Hardware Replacement Guide
© Copyright Lenovo 2017
Chapter 4. Software Tools
Use the following software tools for easier appliance configuration:
•
Advanced Settings Utility (ASU)
Advanced Settings Utility
The ASU tool is a scriptable command line program. Use the ASU tool on multiple operating system platforms
to:
•
Modify selected basic input/output system (BIOS) CMOS settings without restarting the system to
access F1 settings
•
Modify selected baseboard management controller setup settings
•
Modify selected Remote Supervisor Adapter and Remote Supervisor Adapter II setup settings
•
Modify selected settings in the integrated management module
•
Modify a limited number of VPD settings
•
Remote connectivity to support setting all the listed firmware types settings. Remote connection support
requires accessing the XCC external port over a LAN
For more information and to download the ASU program, go to the Advanced Settings Utility (ASU) for Lenovo
x86 servers website.
Nutanix Support Link
Please visit http://portal.nutanix.com for more detailed information about the software, as well as access to
Knowledge Base articles. Registration is required.
Software-centric hardware replacement documentation is available at
https://portal.nutanix.com/#/page/docs/list?type=hardware, filter on Lenovo HX series.
To Next Page
Loading...
