Lenovo ThinkAgile HX Series - Operating Mode

16
Lenovo Converged HX Series Hardware Replacement Guide
© Copyright Lenovo 2017
Figure 13 illustrates where to change the setting using UEFI setup.
Figure 13. Direct Cache Access (DCA)
Operating mode
Operating mode must be configured to ensure correct operation. To configure:
1. Turn on the server.
Note: If necessary, connect a keyboard, monitor, and mouse to the console breakout cable and connect the
console breakout cable to the compute node.
2. When the prompt 'Press <F1> Setup' is displayed, press F1 and enter UEFI setup. Follow the instructions
on the screen.