Lenovo ThinkAgile HX Series - Page 20

17
Lenovo Converged HX Series Hardware Replacement Guide
© Copyright Lenovo 2017
3. Select System Settings --> Operating Modes and set it to 'Custom Mode' as shown in 'Custom Mode'
figure, then set UEFI settings as follows:
Choose Operating Mode <Custom>
Memory Speed <Max Performance>
Memor
y Power Management <Disabled>
CPU P
-state Control <Autonomous>
C1 Enhanced Mode <
Disable>
U
PI Link Frequency <Max Performance>
U
PI Link Disable <Enable All Links>
Turbo Mode <Enable>
Energy Efficient Turbo <Enable>
C
-States <Disable>
Power/Performance Bias <Platform Controlled>
Platform Controlled Type <Maximum Performance>
Page policy
<Closed>
Figure 14 illustrates where to change the setting using UEFI setup.
Figure 14. Operating Mode
4. Press Escape key 3 times, and Save Settings.
Exit Setup and restart the server so UEFI changes take effect.