• “1030 Base cover assembly” on page 78
• “1090 Battery pack” on page 83
• “1100 Speaker assembly” on page 84
Removal steps of the fingerprint reader board bracket and fingerprint reader board with cable
Step Screw (quantity) Color
Torque
1
M2 × 2.5 mm, wafer-head, nylon-coated (2)
Black 0.181 Nm
(1.85 kgf-cm)
When installing: Ensure that the connectors are attached firmly.
1170 Rear camera board with cable
For access, remove these FRUs in order:
• “1030 Base cover assembly” on page 78
• “1090 Battery pack” on page 83
Chapter 9. Removing or replacing a FRU 91