Table39.ItemsundertheBootmenu
ItemSub-itemOptionDescription
QuickBoot[Disabled]Enabled
Enableordisablethequick
bootfeature.
QuietBoot[Enabled]Disabled
Enableordisablethe
featuretoshowOEMLogo
duringthePOST.
AddOnROMDisplayMode[ForceBIOS]KeepCurrentSettheAddOnROM
DisplayMode.
BootSettingsConguration
BootupNum-Lock
[Off]OnSettheNum-LockLED
state.
1stBootDeviceBootdevicenames BootDevicePriority
2ndBootDeviceBootdevicenames
Setthestartupdevice
sequence(supportatmost
vestartupdevices).
HardDiskDrives1stDrive2ndDrive...Basedontheinstalledhard
diskdrives.
CD/DVDDrives
1stDrive...Basedontheinstalled
opticaldrives.
Note:Thesettingsin[]arethedefaultsettingsintheSetupUtilityprogram.
Table40.ItemsundertheSecuritymenu
ItemDescription
ChangeSupervisorPasswordSetorchangethesupervisorpassword.Thepassword
canbeanycombinationofupto6(1to6)alphabeticand
numericcharacters.
ChangeUserPasswordSetorchangetheuserpassword.Thepasswordcan
beanycombinationofupto6(1to6)alphabeticand
numericcharacters.
Note:Thesettingsin[]arethedefaultsettingsintheSetupUtilityprogram.
Table41.ItemsundertheChipsetmenu
ItemSub-itemOptionDescription
QPIFrequency[Auto]4.800GT5.866GT6.400GT Standardtransferringrate
oftheQPIbus.
QPIL0sandL1Disabled[Enabled]EnableordisabletheQPI
L0sandL1.
MemoryFrequency
[Auto]ForceDDR-800Force
DDR-1066ForceDDR-1333
Setthefrequencyofthe
memorymodule.Make
surethatthemandatory
memoryfrequencysetting
islessthanthemaximum
frequencythatthememory
modulecansupport.
CPUBridgeConguration
MemoryMode
[Independent]Channel
MirroringLockstep
Setthememorychannel
modetoimprovereliability
orefciency.
116ThinkServerRD230HardwareMaintenanceManual