Lenovo ThinkServer RD230 - Starting the Configuration Utility Program

SASconnectorSAScablelabelSystemboardSASconnector
6
P1
SASconnector0
7
P2
SASconnector1
8
P3
SASconnector2
9
P4
SASconnector3
StartingtheCongurationUtilityprogram
DuringthePOST,whenthemessage“PressCtrl-CtostartLSILogiccongurationUtility...”isdisplayed,press
Ctrl+CtoentertheCongurationUtilitymainmenu.PressEnterandtheAdapterListwindowisdisplayed.In
thiswindow,youcanviewthecontrollerlist,viewtheharddiskdriveinformation,andcongureRAID.
Whenworkingwiththisprogram,youmustusethekeyboard.Thekeysusedtoperformvarioustasksare
displayedatthebottomofeachscreen.
Table43.ItemsintheAdapterListwindow
ItemDescription
Adapter
TheSASadapter(s)detected
PCIBusThePCIbusnumberassignedtotheadapter
Dev/FncThePCIdeviceorfunctionassignedtotheadapter
FWRevision
Thecurrentrmwareversion
Status
Indicatingwhethertheadapteronthebootlistisenabled
ordisabled
BootOrder
Indicatingthebootsequence.Youcanchangethe
sequencebypressing+or-.
YoucanpressAlt+NtoswitchtotheGlobalPropertieswindowtosetthepropertiesofbootandinterrupt.
Table44.ItemsintheGlobalPropertieswindow
ItemDescription
PauseWhenBootAlertDisplayedIndicatingwhethertostopthebootwhenthealertoccurs
duringtheboot.Thecurrentpropertycanbechangedby
pressing+or-.
No:Selectthisoptionifyouwanttocontinuetoboot
whenthealertoccurs.
Yes:Selectthisoptionifyouwanttopausetheboot
whenthealertoccursandthenyoucanpressanykey
tocontinue.
BootInformationDisplayMode
DeningwhatwillbedisplayedintheBIOSinterface
duringtheboot.Thecurrentpropertycanbechangedby
pressing+or-.
SupportInterrupt
Indicatingthesupportedinterruptmode.Hookinterrupt,
theDefaultisthedefaultvalue,whichsupportsbooting
fromCD-ROMinoppyemulationmode.
RestoreDefaultsRestoringdefaultsettings
124ThinkServerRD230HardwareMaintenanceManual