d.
Place the drive on a flat, static-free surface and away from magnetic devices.
7.
Remove the drive drawer:
a.
Locate the plastic release lever on each side of the drive drawer.
(1) Drive drawer release lever
b.
Disengage both release levers by pulling the latches toward you.
c.
While holding both release levers, pull the drive drawer toward you.
d.
Remove the drive drawer from the drive shelf.
5.4.6. Step 4: Install new drive drawer
Install a new drive drawer to replace the failed one.
What you’ll need
•
A location for installing each drive.
•
A replacement drive drawer.
•
A flashlight.
Steps
1.
From the front of the drive shelf, shine a flashlight into the empty drawer slot, and locate the
lock-out tumbler for that slot.
The lock-out tumbler assembly is a safety feature that prevents you from being able to open
more than one drive drawer at one time.
79
To Next Page
Loading...
