(1) Lock-out tumbler
(2) Drawer guide
2.
Position the replacement drive drawer in front of the empty slot and slightly to the right of
center.
Positioning the drawer slightly to the right of center helps to ensure that the lock-out tumbler
and the drawer guide are correctly engaged.
3.
Slide the drive drawer into the slot, and ensure that the drawer guide slides under the lock-out
tumbler.
Risk of equipment damage — Damage occurs if the drawer guide does not
slide under the lock-out tumbler.
4.
Carefully push the drive drawer all the way in until the latch fully engages.
Experiencing a higher level of resistance is normal when pushing the drawer closed for the first
time.
Risk of equipment damage — Stop pushing the drive drawer if you feel
binding. Use the release levers at the front of the drawer to slide the drawer
back out. Then, reinsert the drawer into the slot, ensure the tumbler is above
the rail, and the rails are aligned correctly.
80
To Next Page
Loading...
